Posted on

Ridgewood Water Hydrant Flushing 2017 will begin on Monday, October 16, 2017

firehydrant 001

Hydrant Flushing Active

October 16,2017

the staff of the Ridgewood blog

Ridgewood NJ, Ridgewood Water will be performing system flushing. This work will include the operation of fire hydrants at flow velocities sufficient to remove naturally occurring minerals that have precipitated out of the water and settled.  This may temporarily discolor the water so we will be conducting this activity late at night to minimize the effect on consumers.  There are no health concerns associated with the minerals that get stirred up, but residents are urged to avoid doing laundry while crews are working. Ridgewood Water will notify residents using the Swiftreach calling system in advance of the work in their specific areas.  Residents may register to receive these calls by clicking on the SwiftH2O link on the bottom of this page.

-To determine which flushing route you are in, or to see a video on the hydrant flushing process, please click here:
Flushing will begin in Route 1 on Monday, October 16th, between 9:00pm and 4:30am.

Route 1

Tips for our customers:
Tap water may be discolored while crews are flushing in your area (9:00pm-4:30am) so you should avoid the use of washing machines and dishwashers during those hours. Even when it is discolored, the water is safe for consumption.
Discolored water may linger in your pipes after the flushing work has been completed.  If so, run the cold water until the water runs clear.
Check at a nearby faucet for discolored water before using the washing machine or dishwasher. Wait until the water runs clear at the tap before doing laundry or running the dishwasher. If your laundry inadvertently becomes stained, DO NOT PUT YOUR LAUNDRY IN THE DRYER. Rewash clothes immediately using detergent and a rust remover such as “Red B Gone”.  This product will be available from Ridgewood Water if needed. Most rust removers can also be used on stained fixtures such as sinks, tubs, and toilets.
If water pressure or water volume at the tap seems unusually low after flushing has been completed in your area, check your faucet aerators for trapped particles.