Modern homes prefer using aluminium windows due to the fact that such windows are durable and stylish. They cannot be rusted and can withstand the extreme weather conditions in comparison to most other materials. Nevertheless, they need some attention as well as any other component of your home to remain in optimal condition. Constant care makes them work properly and appear beautiful during a long period of time. With the help of some easy measures, you will be able to prolong the life of your windows and never have to spend large sums on their repairs.
Routine Cleaning
Cleaning your windows is the best method of having them maintained. grime and dirt may accumulate on the windows and the frames over time. This accumulation may destroy the look of your house. Add a light detergent to warm water to clean them. Dead blow the frames with a soft sponge or cloth. Do not use any abrasive material such as scouring pads or steel wool. These have the potential to scratch the surface and destroy the protective finish. Wash the windows properly with clean water so as to do away with the traces of the soaps.
Protecting the Finish
Aluminium frames have a very tough powder-coated finish. Even with this strength it is possible to have corrosion in the salt and pollution because it may eventually take some time to be contained. This is particularly necessary when you are living close to the coast. To avoid this damage, experts in AIS Aluminium Windows & Doors recommend that one should wash his frames at least three to six months. Frequent cleaning eliminates salt deposits and industrial fallout. This is an easy practice that maintains the colour and lustre of the metal. It aids in also keeping your warranty in place.
Lubricating Moving Parts
Frustrating windows may be windows that cannot be stuck or opened easily. This normally occurs when the moving components are dry or full of dirt. The hinges, locks and rollers should be lubricated at least once per year. Apply silicone based spray in this task. Do not apply oil and grease as they are a dust and grit attractant. Apply a little lubricant in the mechanisms and slide the window in and out. This assists in giving the spray a workout into the joints and smooth operation will be ensured.
Clearing the Tracks
The grooves of moving windows are the attractant of dust, dead insects, and leaves. The build-up of debris in this area may also impair the rollers as well as cause the window to be hard to slide. Vacuum cleaner with a small tube should be used to remove sporadic dust of the tracks. In case of hard grime, an old toothbrush should be used to soften it up and then wiped out. Weep holes also have to be checked. They are tiny holes which enable water to leak out. Water may stagnate and seep into your house in case they are blocked.
Checking Seals and Gaskets
Rubber seals that are used around the glass are important in insulation. They leave drafts open and prevent the flow of water in your house. These seals may crack and even dry as time goes by due to exposure to the sun. Check the rubber gaskets on a yearly basis, to determine whether they are worn or shrunken. When there are holes or weak points you are supposed to substitute the seals as soon as possible. Good seals increase the energy efficiency of your home and do not allow your walls and floors to be damaged by moisture.
Conclusion
There is no much effort needed to take care of your aluminium windows. Cleaning and lubrication are nothing but a little. You save your investment by having the frames clean and free and the mechanisms moving freely. These easy maintenance measures will ensure that your home is always beautiful, and your windows are always working all through your life.
